Reason RE Rob Papen RPSpec v1 0 0-DECiBEL

ÛÛÛÛÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛÛÛÛÛ
ÛÛÛÛÛßßÛÛÛÛÛ ß ÛÛÛßßÛÛÛÛÛ ÛÛÛÛÛßßßßßßß ß ßßß ÛÛÛÛÛ ß ÛÛÛßßÛÛÛÛÛ ÛÛÛÛÛ
ÛÛÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛßßßßßßß ÛÛÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛßßÛÛÛÛÛ ÛÛÛÛÛßßßßßßß ÛÛÛÛÛ
ÛÛÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛ ßßÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛ ßßÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛ ÛÛÛÛÛ
ÛÛÛÛÛ ÛÛÛÛÛ ßßßßßßßßßßßß ß ßßßßßßßßßß ßßßßß ß ßßßßßßßßßß ßßßßßßßßßßßß ÛÛÛÛÛ
ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

NAME...: Reason.RE.Rob.Papen.RPSpec.v1.0.0-DECiBEL
RLS#...: 4309
TEAM...: DECiBEL
TYPE...: ReasonRE
DATE...: 14 Sep 2021
SiZE...: 2 x 1MB
URL:...: https://bit.ly/3AbVrIL

ÍÍ RELEASE iNFO ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

A spectrogram is a visual representation of the spectrum of frequencies in a
sound or other signal as they vary with time. The RP-Spec spectrogram displays
the input and output signal as an FFT Spectrogram, a 30 band (1/3 octave) Bar
Spectrogram or a 30 band (1/3 octave) Single line Spectrogram. Various view
types are available.

The RP-Spec spectrogram displays the input and output signal as an FFT
Spectrogram, a 30 band (1/3 octave) Bar Spectrogram or a 30 band (1/3 octave)
Single line Spectrogram.

Modes - The Mode setting switches the display to visualise the left channel,
the right channel, or both simultaneously.

Spectrogram functions - The icons on the left-hand side of the Spectrogram
display switch the display mode between FFT Spectrogram, Bar Spectrogram, and
the Single Line Spectrogram. - Selecting the Line on right draws a line on the
display to 'mark' the frequency as a visual aid.

Freeze function -The Freeze function holds the current output of the
Spectrogram until it is released again. Use the Freeze function to study the
frequency spectrum of your work at a specific point in time.

Boost - The Boost function amplifies the sound fed into the Spectrogram.
Please note that this does not make the audio output louder - it only applies
to the visualisation engine. Use this function to get a more detailed spectral
view of soft passages in your music.

Release / Hold - In Bar / Line mode the maximum values (peak levels) across
the spectrum form a continuous line. The Hold function sets the time interval
for the display time before it gets refreshed. The Release control determines
how long it takes for the spectrum to fall back to a flat line after a
reduction in signal levels. In FFT Spectrogram mode, the release value reduces
the refresh rate and manifests itself as a slowing down of the Spectrogram. If
you experience the Spectrogram as being sluggish, turn down the Release
setting.

Back Panel -Here you can find the audio inputs and audio outputs.

ÍÍ iNSTALL NOTES ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

You need R2R's Reason release and TEAM R2R Reason Rack Extension Cache Builder

Copy the RackExtension folder to
"e;%APPDATA%\Propellerhead Software\RackExtensions\"e;

Copy *.R2RRECACHE file to
"e;%APPDATA%\Propellerhead Software\R2RRECACHE\"e;

After you add new RackExtension(s), you need to rebuild the RE cache:
Just run "e;RECacheBuilder.exe"e; from TEAM R2R Reason Rack Extension Cache Builder
Cache file will be built.
Done!

ÍÍ RELEASE NOTES ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

We know it's free, but this is required if you use the R2R Reason release.

Big thanks to R2R for sharing their knowledge and providing the resources!

ÍÍ GROUP NOTES ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

-

ÍÍ GREETS ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

AiR AudioP2P AudioUTOPiA FLARE HEXWARS MATRiX R2R RET SPTNDC SYNTHiC4TE

ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ[NFO v3]ÍÍÍÍÍÍÍÍÍÍÍ